返回   吉米丘上的海盜樂園 > ◎ 吉 米 丘 上 的 金 銀 島 > DENSION Gateway iPod汽車圓夢專區

DENSION Gateway iPod汽車圓夢專區 針對Dension iceLink、Gateway所有安裝經驗、問題、分享的專區

回覆
 
主題工具 顯示模式

[求助][問題]ICELINK 韌體更新錯誤
舊 09-11-2007   #1
kshuang
 
kshuang 目前離線
註冊日期:
09-11-2007
文章:
5
kshuang
預設 [求助][問題]ICELINK 韌體更新錯誤

吉米大大~

之前我的版本來自網購,而我的車子是Acoord 2004年.本身之前是可以用ICELINK,
但是因為韌體更新到錯誤的版本. 而我問過原廠後,他們跟我說可以找台灣的你處理.
而原廠也給我一份HONDA的韌體版本. 但是無法更新,他建議以ICE KIT處理.

請問一下,是否可以協助?

[痛哭]







  回覆時引用此篇文章

舊 09-11-2007   #2
SpotEyes
論壇管理員
領航員
 
SpotEyes 的頭像
 
SpotEyes 目前離線
註冊日期:
03-20-2002
文章:
1,351
SpotEyes 的聲望功能已被禁用
發送 ICQ 消息給 SpotEyes
預設

email 給我吧sunny*27352941.com





__________________

交叉概念國際 Crossover Concept International
Tel. 886-2-8218-1202
Mail. sunny*crossoverconcept.com
www.crossoverconcept.com

德國頂級精品煞車系統 MOV'IT BRAKES 萬一停止的安全升級 www.MOVIT.DE


  回覆時引用此篇文章

舊 09-14-2007   #3
kshuang
 
kshuang 目前離線
註冊日期:
09-11-2007
文章:
5
kshuang
預設

已經MAIL給你了

-----------------------------------------------







  回覆時引用此篇文章

[Help] My ICE-LINK needs a flash station to recover!!
舊 09-19-2007   #4
kshuang
 
kshuang 目前離線
註冊日期:
09-11-2007
文章:
5
kshuang
預設 [Help] My ICE-LINK needs a flash station to recover!!

[疑惑]

不知道給你的資訊有收到嗎?
以下為原廠的回應:


From: Orsos Imre [mailto:iorsos*dension.com]
Sent: Thursday, December 07, 2006 5:40 PM
Subject: RE: [help][It still fail in FW version]RE: upgrade for ice>Link plus for Honda V2 FW.: 3.H1

Hi, i've just got the information, may your distributor can repair it too, because they can do hardware firmware upgrades, with a flash station.


Sent: Thursday, December 07, 2006 3:22 AM
To: iorsos*dension.com
Subject: [help][It still fail in FW version]RE: upgrade for ice>Link plus for Honda V2 FW.: 3.H1

Hi,

The upload procedure seems need a CDC trigger device to enable AUX. Somehow the AUX locked by protection issue.
Yesterday, I have tried two flow and can't make sure who is right.

Procedure 1:

1. remove battery and wait 10min.
2. connect battery.
3. start car-radio.
4. turn the key off.
5. remove icelink.
6. plug a HONDA device to trigger AUX.
7. turn key on and start car-radio.
8. switch FM/AM/CD/CDC.
9. turn key off and remove HONDA device.
10. connect icelink
11. Play MUSIC/Genres/_config/Update/Start_Update.mp3
12. Connect Ipod to icelink and I saw "Dension logo" and show version at right corner.
13. During 10min, the ipod screen switch "Dension logo" only and never show anything.
15. Turn key off and remove ipod
14. Turn key on and connect ipod. The screen never show anything for "Dension logo" and only ipod normal screen.

Procedure 2:
1. Keep battery always alive.
2. Turn key off and plug Honda device to trigger AUX.
3. Turn key on and switch FM/AM/CD/CDC.
4. Turn key off and remove Honda device.
5. Reconnect icelink and turn key on.
6. Play MUSIC/Genres/_config/Update/Start_Update.mp3 and plug ipod to icelink.
7. The "Dension logo" shows logo only.
8. After 10min, to turn key off and on and reconnect ipod.
9. The screen never show anything for "Dension logo" and only ipod normal screen.

Anyway, I can't replace FW from 2.07 to Honda version.

Help ~~

If you have any question, please free to contact and discuss.
B.R.
-----------------------------------------------
Jerry Huang


-----Original Message-----
From: Orsos Imre [mailto:iorsos*dension.com]
Sent: Tuesday, December 05, 2006 9:00 PM
Subject: FW upgrade for ice>Link plus for Honda V2 FW.: 3.H1

Hi please upgrade the FW with these files (the newest firm for V , and after update run carconfig clear, and the attached carif_honda file. ice>Link for Honda)

The firmware you uploaded (2.07) on your ice>Link hasn't got the Honda interface.


1step :
FW upgrade :
Follow the steps below to update firmware when menu is not available:

Delete previous update files and reset iPod. Copy the update package to iPod (cca 750 files). Copy the Start_Update.mp3 onto iPod. Disconnect iPod from PC. Power on the car radio and change source to ice>Link (CD changer). Select Browse/Genres/_config/Menu/Update/Start_Update song and play it on iPod. While playing, insert iPod into the cradle or connect the dock cable; update process will start automatically.
After about 5 minutes, ice>Link will restart with the new firmware. While displaying "Dont browse.." message you can check version number in the top right corner
of the screen.
then 2. step

Reconfigure :

You can reconfigure head unit type any time. Download and copy Configuration Clear file to iPod, disconnect from the PC and start playing.
While iPod is playing silently the file, connect iPod to ice>Link Plus. Current configuration will be deleted and you can reconfigure ice>Link Plus

select the configuration file CarIf_Honda.mp3 and run it. During playback, insert iPod to the cradle or connect dock cable.

You will see the text like this on the iPod:

" please visit install.dension.com to get carradio configurations " (you do not have to download it is in the attachement.)

This screen will pop-up for few seconds, followed by the next screen.

"Volkswagen config selected, please turn ignition on and off again. select cd-changer"


Please follow the directions on the display.

Once system is reinitialized, it should be recognized by your radio as a CD-changer type of device.

Please keep the sequence of the steps. so your product will be working again.


Imre Orsos
Technical support / Help-desk
Dension Audio Systems ltd.
H-1116 Budapest, Sztregova u. 1

Tel.: +36 (1) 463 0470

web: http://www.dension.com
e-mail: iorsos*dension.com

Subject: [Help] Firmware requires!!!
To: <support*dension.com>
Date: Mon, 04 Dec 2006 06:37:56 +0100

Hi,

I have installed ice-link plus and it was function as I want. It's good ideal and production.
Few day ago, I re-install firmware from v3.02 to v2.07 and everything be wrong.

1. The AUX-IN can't accept ice-link and switch to CD-C and re-charge only.
2. The dension logo disappear at ipod screen.
3. I can't find right firmware from internal.


Would you tell me the right procedure and how to recover firmware?
Also, I tried to use carif_xxxx.mp3 and start_update.mp3 to clean. The machine never show dension logo.


Car: Honda Accord 2003. (Original firmware is 3.02 and function)
Ipod: 5G Video 60G (recently firmware version.)

If you have any question, please free to contact and discuss.
B.R.
-----------------------------------------------
Jerry Huang







  回覆時引用此篇文章

舊 09-19-2007   #5
kshuang
 
kshuang 目前離線
註冊日期:
09-11-2007
文章:
5
kshuang
預設

補充一下: 原廠有說台灣的代理商可以協助
他給我的MAIL內容部分我要找一下 可能之前砍信有誤砍







  回覆時引用此篇文章

舊 09-19-2007   #6
SpotEyes
論壇管理員
領航員
 
SpotEyes 的頭像
 
SpotEyes 目前離線
註冊日期:
03-20-2002
文章:
1,351
SpotEyes 的聲望功能已被禁用
發送 ICQ 消息給 SpotEyes
預設

我幫你研究一下

晚點跟你說





__________________

交叉概念國際 Crossover Concept International
Tel. 886-2-8218-1202
Mail. sunny*crossoverconcept.com
www.crossoverconcept.com

德國頂級精品煞車系統 MOV'IT BRAKES 萬一停止的安全升級 www.MOVIT.DE


  回覆時引用此篇文章

舊 09-26-2007   #7
kshuang
 
kshuang 目前離線
註冊日期:
09-11-2007
文章:
5
kshuang
預設

請問有解嗎?
[疑惑]

不知道您是否有請原廠工程人員協助?
我想這如果不行處理 我會繼續跟原廠處理
如有需要您的協助,我會請對方EMAIL給您

給我希望 不要絕望







  回覆時引用此篇文章

舊 09-26-2007   #8
SpotEyes
論壇管理員
領航員
 
SpotEyes 的頭像
 
SpotEyes 目前離線
註冊日期:
03-20-2002
文章:
1,351
SpotEyes 的聲望功能已被禁用
發送 ICQ 消息給 SpotEyes
預設

Huang 明天您撥個電話給我好了
打公司電話

謝謝您





__________________

交叉概念國際 Crossover Concept International
Tel. 886-2-8218-1202
Mail. sunny*crossoverconcept.com
www.crossoverconcept.com

德國頂級精品煞車系統 MOV'IT BRAKES 萬一停止的安全升級 www.MOVIT.DE


  回覆時引用此篇文章
回覆

書籤



主題工具
顯示模式

發文規則
不可以發表新主題
不可以發表回覆
不可以上傳附件
不可以編輯自己的文章

啟用 BB 代碼
論壇啟用 表情符號
論壇啟用 [IMG] 代碼
論壇禁用 HTML 代碼

論壇跳轉



所有時間均為台北時間。現在的時間是 21:59





vBulletin skin developed by: eXtremepixels, Powered By JCMS INTERNATIONAL Co.,Ltd.
Powered by vBulletin® 版本 3.8.3
版權所有 ©2000 - 2024,Jelsoft Enterprises Ltd.
本網站內之文章,版權歸原作者所有,在此發言並無言論免責權,且與本站立場無關,並禁止未授權轉載。